R100 Repeater

Out of band programming

Here is the info on programming the R100 into the ham bands:

In the R100.COM file change the following bytes:

Offset 0x3A43 from 0xC2 to 0xB6

Offset 0x3A45 from 0xD6 to 0xE0

It would be a good idea to make these changes to a COPY of the original file. This should change the bandsplit from 450-470 to 438-480.

Look at the programming cable here. It should look something like Monty's when you are done.


Home