KVL Cable Pinouts

From the T3010 KVL manual 68P81060E35.

LHS numbers are the plug to the KVL.

RHS numbers are the plug to the radio.

MX SERIES RADIO'S CABLE TKN8209

9 GND 9
8 KEY 8
7 /WE 7
6 KID 6

Top of radio
---------------
|  1             10 |
|  2              9 |
|  3              8 |
|  4              7 |
|  5              6 |

MICOR TKN8210 and SYNTOR TKN8229 (different radio plug types)

9 GND 4 and 5 
8 KEY 3 
7 /WE 2 
6 KID 1

EXPO TKN8351

9 GND 4 
8 KEY 2
7 /WE 1 
6 KID 5

SABER TKN8506

9 GND 10 and remote antenna gnd
8 KEY 9 
7 /WE 5 
6 KID 11

SABER PIN OUT (looking the back of the radio):

        (.)
1  2  3 
4  5  6
7  8  9 
10 11 12

The () is ground around remote antenna centre pin.

Plugs for the MX300, the KVL, and the SABER can be got from appropriate remote speaker/mics or 'accessory' cables. The MX300 and the KVLs use the same plug:

(.)  1  10
     2  9
     3  8
     4  7 
(X)  5  6

Where the (.) is the remote antenna connector on the MX300, and (X) is the threaded fixing hole.


Home